The one kite that does it all – any rider, any style, any condition.
Sizes: 5, 6, 7, 8, 9, 10, 11, 12, 14
The Park’s three-strut design and Swept Compact C outline results in a very stable and responsive kite. The powerful profile and leading edge give the rider good low-end power and consistent pull over a wide range of wind speeds.The Park uses just enough sweep to maximize depower and allow for easy relaunch. The Swept Compact C platform remains very close to a real C-shape in order to provide the crispness and feel in the bar that you really need.
Designed with fun in mind, the Park provides the rider with the power to boost, the handling to hit the lip with style and the ability to feel good in any condition.
Key Features:
- Super easy handling
- Versatility
- Crisp bar feel
- Superior low-end performance
- Effortless water relaunch
1. Smaller LE diameter on sizes 9 to 14:
- Allows for easier LE torsion
- Faster turning speed
3. Thinner foil profile in the center section:
- Flies further forward in the wind window
- Quicker depower
4. Thinner foil in the wing tip section:
- Decreased sideways lift
- More rigidity in the air
2. Shorter bridles:
- Crisper bar feel
- Quicker response
- Solid feel in the air
- Increased control
| Size (SQM) | Wind Range | Aspect Ratio | Arc Flatness (H/W) | No. of Struts | Control System | Line Lengths (M) |
|---|---|---|---|---|---|---|
| 5 | 24 + | 4.1 | 0.55 | 3 | Universal | 24 |
| 6 | 20 + | 4.1 | 0.55 | 3 | Universal | 24 |
| 7 | 18 – 31 | 4.1 | 0.55 | 3 | Universal | 24 |
| 8 | 16 – 29 | 4.1 | 0.55 | 3 | Universal | 24 |
| 9 | 15 – 28 | 4.1 | 0.55 | 3 | Universal | 24 |
| 10 | 13 – 26 | 4.12 | 0.55 | 3 | Universal | 24 |
| 11 | 12 – 25 | 4.12 | 0.55 | 3 | Universal | 24 |
| 12 | 11 – 23 | 4.15 | 0.55 | 3 | Universal | 24 |
| 14 | 10 – 20 | 4.2 | 0.55 | 3 | Universal | 24 |
| Turning type: | Jumping type: | Bar feel: | Angle of attack control: | Pull in turns: | Upwind ability: | Unhooked pop: | Arc: | Outline: |
|---|---|---|---|---|---|---|---|---|
FAST + TIGHT RADIUS |
RADICAL POP + EASY GLIDE |
ADJUSTABLE FROM C-TYPE TO LIGHT | HIGH CONTROL |
POWERFUL |
 |
STRONG POP |
 |
SWEPT COMPACT C |
Power Foil Canopy
The Power Foil Canopy has horizontal seam shaping. The result is a kite that creates instant lift.
Evolutive Profile
The profile’s depth and shape evolves along the airfoil. The center sections generate power and speed. The tips are fast turning and minimize drag. This creates a fast flying, stable kite with less back stalling.
Low Drag Wing Tip
This wing tip geometry reduces the overall surface area of the non-lifting portion, which greatly reduces drag. The more efficient the lift/drag ratio becomes, the faster the wing tip can move through the air. This allows the kite to be both quicker and more responsive through turns.
Anti-Stiction Window
The wing tip features a flow through window, which reduces static friction and allows for easy relaunch by letting water drain instantly.
Octopus Inflation System
This proven, quick and easy single-point inflation system creates uniform pressure in the struts and leading edge. The Naish exclusive one-way internal valve ensures that the pressure in the struts does not change during turns.
Radial Load Distribution
All wing tips are designed with seams running parallel to the load generated by the flying lines. These seams carry most of the load, and spread it higher into the canopy. This construction avoids fatigue on the fabric and in the wing tip area.
LWR (Light Wind Relaunch)
With all the new options available in light wind boards, riders are pushing the envelope of what is considered rideable. The new LWR (Light Wind Relaunch) gives the rider complete confidence when going out in the lightest of wind. This system lifts the wing tip independent of the rear leader line, and cups the trailing edge for instant relaunch. The LWR works when nothing else will.
Solid Frame Construction
Every strut is attached to a frame of heavy duty Dacron that is then sewn onto the canopy for unmatched resistance to wear and heavy loads.
Radial Segmented Arc
The Radial Segmented Arc generates the arc using short linear segments to accurately form the kite’s
From bladders to stitching, every Naish kite has been meticulously checked to pass the highest quality control in the industry. Every detail is scrutinized before the kite leaves the factory, to produce a product you can trust.
Easy access zipper placement
Extremely easy access to the internal valve when replacing bladders.
Aramid patches
Patches along LE segments to protect the seams.
Molded TE reinforcement
Optimal trailing edge protection with a molded reinforcement at the end of each strut.
Molded bumpers
Large thermo-molded bumpers wrap around the leading edge, which provide seam protection when landing and launching the kite.
Vertical seam struts
A reduction in the number of pieces used in the struts means more precision in defining the canopy profile. The seams are also reinforced with an extra layer of webbing, and double zigzag stitches to avoid breakage.
2-piece leading edge
This construction provides better twist control of the leading edge, and improves turning performance.
Deflate valve double Velcro closure
The deflate valve has a double-Velcro closure design to ensure closure during impact.
Reinforced strut zippers
A double-Velcro flat enclosure ensures that the zipper will not fail under load.
One-way inflation valves
All LE inflation valves incorporate a ball system to eliminate air escape when removing the pump nozzle.
Inflation pressure gauge
All Naish pumps include a built-in inflation pressure gauge. This provides optimum bladder pressure to maximize the kite’s performance.